The Parts Drop

Parts, Supplies & Information for Xerox®
Copiers, Printers, & Fax Machines.

  Navigation:
  Home » Tech Info
Not Logged In
(Retail)...
   |  Log In  |  Your Account  |  Your Cart  |  Checkout  
website security
Catalog more
- Main Catalog Menu
Part Search
Choose Your Model#
(Optional) Narrows your search to a specific style of machine.
Enter Keywords
You can include a full model name,and a part# (if you have it), as well as descriptive keywords.
 
Tech Info
- Tech Info Menu
(codes & diagnostics)
Your Order more
0 items
Information
Shipping & Returns
Privacy Notice
Conditions of Use
View All Products
Contact Us

Important:.. the information presented here is for the use of a qualified, experienced technician. Without the background knowledge which comes with training, you risk doing more damage than good to the copier & also risk your own safety.
If you are not willing to take 100% responsibility for your actions, do not use the information posted here. Thank you. Read our Conditions of Use for more information

2510 style
PARTS
2510 style
SUPPLIES
CATALOG MENU
TECH INFO MENU


    
2510 style TECH INFO
2510, 2515, 2520
2510 style Copier

These model #’s are trademarks of Xerox Corporation.
All of this information plus far more detailed procedures and parts lists
can be found in their Service Manual. This is available for sale on their website at www.xdss.com

STATUS CODES:
A Document was inserted before copy paper was registered
To clear: Remove document, press ‘Start’, wait for ‘Ready’ to come on.
b Control PWB failure.
b(flashing) Reset Non-Volatile Memory (NVM)
C Transport Cover open… or Upper Rear Cover is off.
E Paper Path Jam.
F Fuser problem.
H Foreign accessory problem.
J (Low Toner Light not Lit): Excessive toner concentration.
J (Low Toner Light Lit): Insufficient toner concentration.
U Total Count Meter is disconnected.
L9 to L0 Copier is warming up.
Constant P Copier is in the power saver mode.
Constant L9 or L8 Copier does not warm up.

Entering Diagnostics:

2510: Press & hold the ‘Copy Output’ button while powering up.

2515/2520: Press & hold the ‘Bond’ and ‘Film’ buttons while powering up.

Once diagnostics is entered, the display will light up & then after 3 seconds, the lamps will turn off & the current software revision level will be displayed as the letter L and a number… then a ‘0’ will be displayed.

Use the Copy Contrast UP & DOWN buttons to select the test you want to run.

Exiting Diagnostics: Press the ‘Stop’ button.

Important Precautions:
These engineering copiers are actually relatively simple machines… but there are a few important things to know:

  • Always remove the Fuser Lamp before removing the Fuser.
  • If you need to run the Main Motor from diagnostics… always turn on the cooling fans & fuser for 2 minutes first. This is because room temperature fuser oil can seize up the fuser and cause gears to break.
  • When running tests on the exposure lamp or high voltage, turn on the Main Motor first to avoid damaging the drum.
  • When installing a new Fuser Roll, oil the roller thoroughly.

2510 style
PARTS
2510 style
SUPPLIES
CATALOG MENU
TECH INFO MENU


www.partsdrop.com (201)387-7776 U.S.A.

The Parts Drop is a family owned business. Our home is at 26 Palisade Avenue in Bergenfield, NJ 07621.
Thank you for your business!

* Xerox and all of their model #'s are Registered Trademarks of Xerox Corporation...
The Parts Drop is not affiliated with Xerox Corporation except for the fact that we love'em!

This Website layout was created based on the wonderful: osCommerce
Powered by osCommerce Copyright © 2003-2008


osCommerce