The Parts Drop

Parts, Supplies & Information for Xerox®
Copiers, Printers, & Fax Machines.

  Navigation:
  Home » Tech Info
Not Logged In
(Retail)...
   |  Log In  |  Your Account  |  Your Cart  |  Checkout  
website security
Catalog more
- Main Catalog Menu
Part Search
Choose Your Model#
(Optional) Narrows your search to a specific style of machine.
Enter Keywords
You can include a full model name,and a part# (if you have it), as well as descriptive keywords.
 
Tech Info
- Tech Info Menu
(codes & diagnostics)
Your Order more
0 items
Information
Shipping & Returns
Privacy Notice
Conditions of Use
View All Products
Contact Us

Important:.. the information presented here is for the use of a qualified, experienced technician. Without the background knowledge which comes with training, you risk doing more damage than good to the copier & also risk your own safety.
If you are not willing to take 100% responsibility for your actions, do not use the information posted here. Thank you. Read our Conditions of Use for more information

5220 style
PARTS
5220 style
SUPPLIES
CATALOG
MENU
TECH INFO
MENU


XEROX Brand 5220 style
TECHNICAL INFORMATION

5205,5210,5220,5222, XC520, XC540, XC560, XC580
Also: Sharp Z-30 style
5220 Copier Illustration

For Status Codes, Diagnostics, etc... Intraviaís Guides:
These models are covered in the 'Sharp Z Complete' guide under the Sharp Z-30

  • Resetting the Drum Counter... First remove the Front Cover to the left of T/D Cartridge Door to expose the main board. Turn off the machine. Install a jumper wire across JPís (jumper pins) 2 & 3 on the Main Board (just below the VRís). Turn the machine on for 5 seconds and then off. Remove the jumper wire and the drum count is reset.
  • Drum Removal... Remove the Toner/Developer Cartridge. Remove the two screws from the front drum shaft plate. Remove the screw that lies behind the plate. Next turn the machine on its side handle-up and open up the jam clearance door on the belly. Slide the drum forward off of the rear shaft to remove it. Remove the screw which attaches the cleaning unit to the rear frame. Remove the cleaning unit and empty it. It is always a good idea to replace the cleaning blade when replacing the drum.
  • Machine sits idle when print is pressed (may be clicking)... If the toner light is not on but the machine sits idle and continues running, the machine may simply be looking for toner. Sometimes it takes a long time before the toner light actually comes on.
  • Toner light stays on after new cartridge is installed... After the machine is finished cycling, if it still calls for toner, turn the power off and back on for the second cycling. New toner cartridges contain fresh developer which often requires more toner. This is true of OEM as well as reconditioned cartridges.
  • Very dark copies... The chances are that you are lacking a drum ground. Check continuity between the front drum shaft plate and the uncoated part of the drum. If you find no continuity, the drum clip may have come loose inside the drum (or is bent out of shape), or the contacts are dirty.

www.partsdrop.com (201)387-7776 U.S.A.

5220 style
PARTS
5220 style
SUPPLIES
CATALOG
MENU
TECH INFO
MENU

The Parts Drop is a family owned business. Our home is at 26 Palisade Avenue in Bergenfield, NJ 07621.
Thank you for your business!

* Xerox and all of their model #'s are Registered Trademarks of Xerox Corporation...
The Parts Drop is not affiliated with Xerox Corporation except for the fact that we love'em!

This Website layout was created based on the wonderful: osCommerce
Powered by osCommerce Copyright © 2003-2008


osCommerce