The Parts Drop

Parts, Supplies & Information for Xerox®
Copiers, Printers, & Fax Machines.

  Navigation:
  Home » Tech Info
Not Logged In
(Retail)...
   |  Log In  |  Your Account  |  Your Cart  |  Checkout  
website security
Catalog more
- Main Catalog Menu
Part Search
Choose Your Model#
(Optional) Narrows your search to a specific style of machine.
Enter Keywords
You can include a full model name,and a part# (if you have it), as well as descriptive keywords.
 
Tech Info
- Tech Info Menu
(codes & diagnostics)
Your Order more
0 items
Information
Shipping & Returns
Privacy Notice
Conditions of Use
View All Products
Contact Us

Important:.. the information presented here is for the use of a qualified, experienced technician. Without the background knowledge which comes with training, you risk doing more damage than good to the copier & also risk your own safety.
If you are not willing to take 100% responsibility for your actions, do not use the information posted here. Thank you. Read our Conditions of Use for more information

5318 style
PARTS
5318 style
SUPPLIES
CATALOG
MENU
TECH INFO
MENU


    
5318 style TECH INFO
5318/5320/5322
5318 style Copier illustration

These model #’s are trademarks of Xerox® Corporation.
All of this information plus far more detailed procedures and parts lists
can be found in their Service Manual. This is available for sale on their website at www.xdss.com

These models as well as many other makes and models are covered in the Intravia’s Guides: 6th Edition.

Status Codes: (Press ‘0’ to see the sub code)

A Codes

Document Feed Problems

C Codes

Paper Feed or Pre-registration Jam Problems

E Codes

Post-registration / Exit Jams & Duplex Problems

F Codes

Sorter Jam or Interlock Problems

H Codes

HCF (High Capacity Feeder) or ADF Problems

J1 Code

Toner Empty

J3 Code

Copy Cartridge not installed (or not seated properly)

J7 Code

Copy Ctg. count expired (replace the connector, See p.13)

J8 Codes

Improper Copy Cartridge (or not seated properly, See p.13)

L6 Code

Key Counter not installed

L8 Code

Platen Temperature too high

L9 Code

Communication error with Inter-Image Lamp PWB

U1-1 Code

Xerographic Motor Problem

U2 Codes

Scanner Drive Problems

U3-1 Code

Lens Drive Problem

U4-1 Code

Fuser Thermistor Open

U4-2 Code

Fuser took too long to warm up

U4-3 Code

Fuser stays on after reaching operating temperature

U4-4 Code

Fuser stays on too long after copy cycle

U4-6 Code

Fuser Over-temperature

U5 Codes

Sorter Bin Drive Problem

U6 Codes

Memory Problems / Main Board Problems

U8 Codes

Exposure Problems

Diagnostics: Hold the ‘0’ while turning on the power to enter diagnostics. To enter a code, enter the 1st part of code, followed by ‘Print’, then the 2nd part of code & then ‘Print’ again.

Fuser Overheat Reset: (50-20): First make sure that you have repaired the cause of the overheat. With the front door open, enter diagnostics (hold '0' while turning on the power). Then enter the code 50-20 (press '50', followed by 'Print', then '20', followed by 'Print' again), then press ‘0’ followed by ‘Print’. NOTE: Watch to make sure the lamp cycles off the way it should once the machine comes to ready (if it stays on continuously, then the SSR (Solid State Relay) may be shorted (located under the transport belt assembly).

Read Total Copy Count: (30-50)

Read Copy Cartridge Life Remaining: (30-91)

Light Copy Problems?

Inoperable ADF: Usually a bad ADF Low Volt PSI (lost the 24 volt line)… replace it (5322) or pick up a LVPS Bypass Kit (5318/20)...


www.partsdrop.com (201)387-7776 U.S.A.
5318 style
PARTS
5318 style
SUPPLIES
CATALOG
MENU
TECH INFO
MENU

The Parts Drop is a family owned business. Our home is at 26 Palisade Avenue in Bergenfield, NJ 07621.
Thank you for your business!

* Xerox and all of their model #'s are Registered Trademarks of Xerox Corporation...
The Parts Drop is not affiliated with Xerox Corporation except for the fact that we love'em!

This Website layout was created based on the wonderful: osCommerce
Powered by osCommerce Copyright © 2003-2008


osCommerce