For Xerox® models: (CopyCentre) 35, 45, 55, 165, 175, 232, 238, 245, 255, 265, 275, C35, C45, C55, C165, C175, (DocumentCentre) 535, 545, 555, (WorkCentre) 165, 175, 232, 238, 245, 255, 265, 275, M35, M45, M55, M165, M175, Pro35, Pro45, Pro55, Pro165, Pro175, Pro232, Pro238, Pro245, Pro255, Pro265, Pro275, (WorkCentre) Bookmark 40, 55, & (WorkCentre) 5030, 5050, 5135, 5150, 5632, 5638, 5645, 5655, 5665, 5675, 5687, 5735, 5740, 5755, 5765, 5775, 5790
Inverter Tire Kit (4 Tires)
Note: One kit would be needed for each of the following rollers in the Inverter Module:
the Post Fuser Roller,
the Second Inverter Roll,
and the Upper & Lower Inverter Drive Rolls.
Scribe where the old tires are, peel off the old rubber and use a tool to clean off any residue and then slide the new tires onto the shaft. They are snug enough that adhesive is not needed. As the rollers are reinstalled in the Inverter Module, check that the new tires are not rubbing on anything and reposition them as needed so they turn evenly (not crooked).
This kit can be used in the place of the tires found in the Inverter Repair Kit: 604K18381 / 604K35410, or the tires fit on the following roller part numbers: 6K29971 / 006K29971, 6K29981 / 006K29981, 604K55570.
The part numbers for the complete Inverter Modules which this tire kit rebuilds include: 112K620 / 112K00620, 112K621 / 112K00621, 112K700 / 112K00700, 112K701 / 112K00701, 112K711 / 112K00711, 112K730 / 112K00730, 112K802 / 112K00802, 112K803 / 112K00803 & 112K812 / 112K00812.