5614 style Reconditioning Supplies 5614 style TECH INFO HOME PAGE MENUTECH INFO MENU LEAVE US E-MAIL
www.partsdrop.com (201)387-7776 U.S.A.

XEROX 5113,5114,5614
Copy Cartridge Reconditioning Instructions

Note: Xerox & all of these Model#'s are Trademarks of Xerox Corporation.

INTRODUCTION:


These cartridges are a pleasure to recondition. They are very friendly. The key to resetting the copy count lies in sending the connector out for repair. Replacement Drums & Cleaning Blades are available and the drums are capable of running more than 60,000 copies.

SECTION I: TOOLS AND SUPPLIES

Tools you’ll need:

Supplies you may need: Replacement components which you may need:

SECTION II: PROCEDURE

1.) First check the drum for flaws (turns counter-clockwise if you’re looking at the rear end). Look for scuff marks, scratches, or discoloration. Also see if the Cleaning Blade is leaving any streaks on the drum. Fingerprints and some minor scuff may come off when you polish the drum later.

2.) Remove the front end drum spindel (1 screw and a quarter turn counter-clockwise). Then the drum can be lifted out of its cradle.

3.) Remove the top cover (3 screws). The Cleaning Blade will lift out after that.

4.) Clean everything well. Be careful not to damage the thin mylar Recovery Blade. Make sure all contacts are clean and either vacuum or blow out the charge corona teeth & scorotron grid.

5614 Cartridge

5.)Reassemble the cartridge. Remove the connector off of the back of the cartridge (2 screws) and send it in for repair. When you get it back, replace it and you are back in business.

Pretty simple ey?

5614 style Reconditioning Supplies 5614 style TECH INFO HOME PAGE MENUTECH INFO MENU LEAVE US E-MAIL

www.partsdrop.com (201)387-7776 U.S.A.