For Xerox® models: (WorkCentre) 7132, 7232, 7242
Toner Reset Connector CRUM (chip resets DMO version, MAGENTA toner cartridge: 6R1272)
***THERE ARE 3 Versions of this type of toner / CRUM... Read Below***
You must remove the original CRUM with its little plastic carrier and discard it. The replacement CRUM chip has peel-and-stick tape, so tape it in place where the original one was positioned and center it as best you can.
Note: We have not found a refill toner material for this type of machine, so far, which we are comfortable selling, but some folks seem to be interested in resetting the toners anyway.
*** 3 Versions... this CRUM is for the DMO-W plan version (006R01272)... There are two other versions:
US Sold version: If you are inside the U.S., you will need one of the US versions (to reset 006R01268) see our part number 7132TRCM or...
Metered version: Some machine in U.S. and possibly outside of the U.S. need the Metered version (for 006R01264)... Metered version machines are less common, but they are out there nowadays and they will reject the Sold version of the CRUMs or cartridges. If your machine rejects the 6R1268 (Sold version), it probably needs the Metered version. We offer that kind of CRUM as 7132TRCMM. Unfortunately we do not know a way to ask the machine which version it wants as of yet, so it is trial and error so far.