For Xerox® models: (WorkCentre) 7132, 7232, 7242
Toner Reset Connector CRUM (chip resets Metered version, MAGENTA toner cartridge: 6R1264)
***THERE ARE 3 Versions of this type of toner / CRUM... Read Below***
You must remove the original CRUM with its little plastic carrier and discard it. The replacement CRUM chip has peel-and-stick tape, so tape it in place where the original one was positioned and center it as best you can.
Note: We have not found a refill toner material for this type of machine, so far, which we are comfortable selling, but some folks seem to be interested in resetting the toners anyway.
*** 3 Versions... this CRUM is for the Metered plan version (006R01264)... There are two other versions:
DMO-W version: If you are outside the U.S., you might need the DMO-W version (to reset 006R01272) see our part number 7132TRCMD.
US Sold version: Some machines in U.S. need the Sold version (for 006R01268)... US Sold version machines are more common, and they will reject the Metered version of the CRUMs or cartridges. If your machine rejects the 6R1264 (Metered version), it probably needs the US Sold version. We offer that kind of CRUM as 7132TRCM. Unfortunately we do not know a way to ask the machine which version it wants as of yet, so it is trial and error so far.