Fuser Module (008R13065, 126K29612, etc.) for Xerox® DC700 Family

DC250 style Fault Reset ‐NVM CODES for various Families: Different families use different fault reset NVM settings. In each case if you have the fault codes happening, you need to reset the appropriate NVM setting back to “0” (it will show a 3 or 4 etc when you read it) Also note that some models use a “3” as the first digit in the fault codes where most of the machines use a “0” as the first digit (So 010‐319 has the same meaning as 310‐319). Fault Code Description NVM value: Must Reset to “0” For: DC240/250, DC‐242/252/260, WC‐7655/7665/7675, WC‐7755/7765/7775 For: 550/560/570 C60/C70: For: DCP700/700i (*770 ONLY) For: C75/J75 010‐319 (310‐319) Fuser Heat Control Problem Reset to 0 : 744‐351 744‐351 744‐361 (*744‐507) 745‐092 & 765‐531 010‐320 (310‐320) Fuser Overheat Reset to 0 : 744‐350 745‐416 744‐360 (*744‐506) 745‐092 & 765‐531 010‐324 (310‐324) Fuser Failure Reset to 0 : 744‐352 744‐352 744‐352 744‐092 & 765‐531 042‐326 (342‐326) IBT Belt Home Sensing Problem Reset to 0 : 741‐105 741‐119 741‐106 741‐132 093‐314 (393‐314) Toner Dispense Problem (Yellow) Reset to 0 : 762‐312 762‐368 762‐312 762‐316 093‐315 (393‐315) Toner Dispense Problem (Magenta) Reset to 0 : 762‐313 762‐369 762‐313 762‐317 093‐316 (393‐316) Toner Dispense Problem (Cyan) reset : 762‐314 762‐370 762‐314 762‐318 093‐317 (393‐317) Toner Dispense Prob. (Black) reset : 762‐315 762‐371 762‐315 762‐319